single crystal ingot drilling core machine
、
AX-3080 掏棒机技术资料
TECHNICAL INFORMATION OF
AX-3080 CORE MACHINE
一、介绍：(Introduction)
本机床适用于单晶硅、蓝宝石、锗类单晶籽晶的批量加工。
The machine is used for batch production of single-crystal silicon, germanium and sapphire.
1.1、适用产品：
圆/方棒料可加工毛坯直径：≤400mm；
最大可加工晶体长度：10～300mm；
Applicable product:
diameter of rough material of round/square bar≤400mm;
maximum length of machined crystal:10-300mm
1.2、成品规格：
长10～240mm/直径10～50mm
毛棒规格：φ400*H240
Specification of finished goods:
Length: 10-240mm/Diameter:10-50mm
Rough bar specification:φ400*H240
1.3、切割效率：16分钟内完成一根籽晶加工（170mm长度籽晶核算，相邻两根前一根开始至后一根开始）（与刀具质量和加工出的棒料直径有关）熟悉后可以自行调节；
Cutting efficiency : A crystallon can be finished within 16minutes. (the length 170mm)
(The efficiency is related to the quality of the cutter and the diameter of the bar.)
It can be adjusted after using it well.
二、 主要技术参数：
项 目 | 内 容 | Items | 单 位 | 参 数 |
行 程 | 左右行程（X） | Range of left and right(X) | mm | 800 |
前后行程（Y） | Range of front and back (Y) | mm | 450 | |
上下行程（Z） | Range of up and down (Z) | mm | 500 | |
主轴头端面到工作台面 | From the head face of spindle to the working table | mm | 70—500 | |
工作台 | 工作台面长 | Length of working table | mm | 1000 |
工作台面宽 | Width of working table | mm | 400 | |
工作台承重 | Bearing weight of the working table | Kg | 500 | |
主 轴 | 锥度 | taper |
| BT40 |
轴心至导轨面距离 | The distance from the axis to the surface of the guide rail | mm | 600 | |
精 度 | 主轴转速 | Rotation speed of the spindle | rpm | 80000 |
额定功率 | Rated power | Kw | 5.5/7.5 | |
定位精度 | Positioning accuracy | mm | ±0.01mm | |
重复定位精度 | Repeated positioning accuracy | mm | ±0.01/300mm | |
轴向电机 | 额定功率 | Rated power | Kw | XYZ:2.3 |
额定扭矩 | Raed torque | N.m | N.m10/10/10 | |
通用参数 | 气源要求 | air | kg | 4-6/ |
机床重量 | Weight of the machine | kg | 4500 | |
外形尺寸 | Outline dimension | mm | 2200*1800*2300 | |
电力要求 | electricity | KVA | 380V3 相 15KVA | |
耗水量 | Water Consumption | L/min | ＜20 | |
耗气量 | Gas Consumption | m³/h | 0.3~0.4 |
